#High end ip camera recorder full
#High end ip camera recorder software

#High end ip camera recorder full

If you were to buy Prime IP cameras with a Prime NVR you are guaranteed to have full functionality directly through the NVR.

The same can be said for the PRIME IP line. There is no need to log into each camera individually for the initial setup or to access the camera’s functionality thereafter. This means that all of the camera options and functionality are directly accessible and configurable through the NVR itself. If you were to buy Elite IP cameras along with an Elite NVR, you can expect that the cameras will work seamlessly with the NVR. This means that the manufacturer of the cameras specifically designed the NVR to be compatible with the user interface, software, and options that are embedded in the camera itself.įor purposes of this example we will talk about the “ ELITE” line and “ PRIME network IP lines by Techpro Security Products. Your best option is to buy network IP cameras that have a compatible NVR. Next I will talk about the various IP camera compatibility options.

The NVR can also house a hard drive(s) to store the recordings of all your IP cameras and dramatically increase your storage capacity.īecause each IP camera has its own user interface and camera options built into the camera itself, not all IP cameras are completely compatible with all NVRs. You can think of an NVR as a hub with a single IP where you can view all of your cameras simultaneously. So, what do you need to view all of your IP cameras in one place? The answer is an NVR (Network Video Recorder). Viewing Multiple IP Cameras SimultaneouslyĪs you might guess, if you have multiple IP cameras, it quickly becomes a hassle to have to go to different IP addresses and log into each camera individually in order to view in real-time or re-view recorded video.

Each IP camera would have its own user interface and specific settings that can be viewed or managed individually by going to the IP address of each camera and logging in to it. IP cameras use CAT5 or CAT6 to transfer the video, and in most cases can be powered over the same cable when use in conjunction with a POE (Power Over Ethernet) switch.Įssentially this means that you can have 1 IP camera on your network or several if you choose. IP cameras are just like any other computer or smart device that is accessible on your network. Many IP cameras also have an SD card for storing recorded video.

#High end ip camera recorder software

All of the software and settings (the brains) are embedded in the camera itself. Network IP cameras, on the other hand, are standalone units that can be accessed via the camera IP address. Usually, analog cameras are powered with a 12 or 24 volt power source. Essentially the DVR is the brains of an analog security system. Without a DVR you would not be able to record or view recorded video. The DVR also provides the ability to view the cameras in real-time and review recorded footage. You can access and modify each camera’s settings through the DVR itself. It also contains the software for managing the camera settings and camera options. The DVR is where the encoding and recording is done. In most cases, an analog camera simply sends the video signal back to the DVR over a coax cable. In order to clarify some of the topics covered, I will often refer to “Techpro Security Products” brand of NVRs and cameras.įirst, it is important to understand some differences between IP cameras and analog cameras. This article will focus on clearing up some common questions regarding Network IP Cameras and NVRs (Network Video Recorders).

When choosing to use IP network cameras for your residential or commercial security camera system there are a few things to take into account.